Understand the current Blynk platform, templates, datastreams and virtual pins, then turn sensor readings and device controls into mobile dashboards and alerts.
Practical guides
0 published articles currently in this path.
Hands-on projects
0 published projects available to build or study.
A connected path
Move from fundamentals to device integrations and more reliable systems.
Explore the curriculum
Published resources open normally. Draft cards are listed for planning, but their article and project pages remain unpublished until they are released.
Build the mental model and get a first working setup before adding complexity.
Build IoT projects with the current Blynk platform: understand templates, devices, datastreams and virtual pins, connect ESP32 and ESP8266 boards, design dashboards and events, and choose the right architecture for sensors and remote control.
Build a simple Blynk 2.0 LED controller for ESP32. Configure a V0 datastream and dashboard switch, upload firmware using the Blynk library, map the virtual pin to a physical GPIO and troubleshoot connection and state-sync problems.
A step-by-step Blynk 2.0 setup for the ESP32: create the account and template, add datastreams, get your auth token, install the library, upload the sketch and control an LED from a dashboard.
Connect a NodeMCU ESP8266 to Blynk 2.0, configure a template and V0 datastream, control a low-voltage LED and troubleshoot Wi-Fi, token and GPIO mapping issues.
A beginner-friendly explanation of Blynk 2.0: how templates, devices, datastreams and dashboards fit together, what the free plan really allows, and when to choose Blynk over MQTT or Node-RED.
Combine boards, sensors, brokers, dashboards and state feedback into practical systems.
Build a Blynk-controlled ESP32 relay interface with explicit safe boot behavior, separate requested and reported state, and reconnection synchronization. Covers active-low module differences and why dashboard state is not proof of a switched load.
Plan schedules and automations for Blynk-connected ESP32 projects. Separate cloud automation from local time-based logic, handle timezone and connectivity failures, and define safe behavior for relays and pumps.
Compare Blynk, Node-RED, Home Assistant and MQTT by purpose, hosting, dashboards, automation, offline behavior and maintenance. Choose a practical stack for ESP32 and ESP8266 projects without adding unnecessary components.
Build an ESP32 plant-watering system with a soil-moisture sensor and Blynk dashboard. Calibrate wet/dry readings, use hysteresis, limit pump runtime, and keep a safe local policy if Wi-Fi or cloud access disappears.
Send DHT11 temperature and humidity from an ESP32 to Blynk 2.0. Configure two datastreams, build dashboard gauges and a history chart, use a timer instead of flooding the cloud, and troubleshoot missing readings.
Build an ESP32-CAM project with Blynk device status, control and event notifications, while serving camera snapshots through a separate documented HTTP endpoint. Understand dashboard limitations, network security and how to avoid exposing an open camera feed.
Build a supervised ESP32-CAM motion-notification prototype using a PIR sensor, Blynk events and a separately secured snapshot endpoint. Includes cooldown, camera/network failure handling and realistic security limitations.
Create an ESP32-CAM monitoring project that reports compatible sensor readings and device status to Blynk. Includes GPIO conflict planning, data validation, update pacing and clear online/stale indicators.
Use an ESP32 PIR input to send Blynk event notifications on a new motion transition. Configure the event, add a cooldown to reduce repeated alerts, and handle sensor warm-up and cloud disconnection.
Focus on resilience, security, logging, integrations and maintainable system design.
More advanced resources are on the roadmap.
This section will grow as new tutorials and projects are added to the SolderHub catalog.
MQTT moves messages, Node-RED connects them into logic, and Blynk can provide a mobile-facing device interface. Pick the layer your project needs.
Have a project idea?
Keep exploring the SolderHub catalog or share a build with the community.